features and specifications specifications applications reference information packaging: tray terminals: reel and loose piece designed in: millimeters electrical voltage: 500v current: 18.0 a*(uscar-2 rev. 3) 16.0 a*(vda ak addition 1, 1996) contact resistance: 20 milliohms max. dielectric withstanding voltage: 1500v min. insulation resistance: 20 megohms min. n pre-assembled connector housing, seals, tpa components and matte-seal cap shipped in one piece provide applied labor and cost savings n easy terminal insertion and extraction ensure quick, low-cost feld repairs using common screw driver, needle nose pliers and terminal extraction tool n integral, two-way matte and interface seals exceeds ip69k waterproof demands as a true sealed connector system tested under submersed conditions and in various fuids features and benefts highly reliable and high-performance src connectors save on applied costs the src connector system was developed to meet the need for a rugged, environmentally sealed connector system, supporting both low-level signals as well as current up to 40.0 amperes. the frst connector in the standard line offered is the 84-way connector. the product uses proven and very successful molex mx150 terminals. together with the higher connector pin count and terminal retention forces (connector system retention greater than 200n), the performance of the src connector surpasses other products on the market. the terminal position assurance (tpa) design assures that crimped terminal leads are properly locked into the connector (tpa will not be achieved if cover tpa will not seat into fnal lock position and the connector system will not latch if the terminal is not locked properly into position). 4.00mm sealed rectangular connectors, 84-way 85070 receptacle housing 85071 plug housing 33000 male blade crimp terminal 33012 female receptacle crimp terminal a matte-seal cap protects, securely retains and provides strain relief to the wire-seal interface. a single-handed lever lock secures the connection between the connectors. designed initially for the non-automotive transportation market molexs src connector may easily be applied to other markets due to the fexibility and capabilities of the product. tooling solutions include fineadjust? crimp-press applicators for high-volume production, as well as hand tools for low volume production and feld repairs. molex is in the process of developing a full range of sealed connectors. for additional product information, please visit: www.molex.com/link/src.html. n superior electrical and mechanical performance capabilities (see product specifcation) surpasses performance of most other competitive products in the market n simple crimp, poke and plug application eliminates the need to crimp individual wire seals n unused circuits can be blocked using plastic seal plugs and facilitating fexibility of sealing unused circuits without adding complexity to part numbers and customer inventory mechanical contact insertion force: 30n max. contact retention to housing: 50n min. mating force: 250n max. unmating force: 250n max. durability: tin plating C 25 cycles gold plating C 100 cycles sealing: iec C ip 69k iec C ip 68 physical housing: nylon contact: copper (cu) alloy plating: tin (sn) or gold (au) contact area tin (sn) or gold (au) operating temperature: -55c to +125c rohs compliant: yes receptacle (female) series 85070 plug (male) series 85071 n agriculture equipment n construction equipment n recreational equipment *depending on circuit size and wire gauge n marine equipment n commercial vehicle
ordering information order no. awg mm 2 hand crimp tool applicator payoff direction (wind) plant no. for samples 33012-2003 22 63811-6000 n/a right (b) 3109 6201 1201 1399 3102 5102 0.5 63811-6200 n/a right (b) 33012-3003 22 63811-6000 69300-1000 left (d) 0.5 63811-6200 63900-1000 left (d) 33012-2002 20/18 63811-6000 n/a right (b) 0.75/1 63811-6200 (0.75mm 2 ), 63811-6100 (1mm 2 ) n/a right (b) 33012-3002 20/18 63811-6000 63900-0900 (20 awg), 63900-0800 (18awg) left (d) 0.75/1 63811-6200 (0.75mm 2 ), 63811-6100 (1mm 2 ) 63900-0900 (0.75mm 2 ), 63900-0800 (1mm 2 ) left (d) 33012-2001 16/14 63811-5900 n/a right (b) 1.5 63811-6100 n/a right (b) 33012-3001 16/14 63811-5900 63900-0700 left (d) 1.5 63811-6100 63900-0700 left (d) female receptacle crimp terminals (tin plated) order no. awg mm 2 hand crimp tool applicator payoff direction (wind) plant no. for samples 33000-0003 22 63811-2600 n/a right (b) 3109 6201 1201 1399 3102 5102 0.5 n/a n/a right (b) 33000-1003 22 63811-2600 63900-0600 left (d) 0.5 n/a 63900-0600 left (d) 33000-0002 20/18/16 63811-2600 (20/18 awg), 63811-2400 (16awg) n/a right (b) 0.75/1 n/a n/a right (b) 33000-1002 20/18/16 63811-2600 (20/18 awg), 63811-2400 (16awg) 63900-0500 (20 awg) 63900-0400 (18awg) 63900-0300 (16 awg) left (d) 0.75/1 n/a 63900-0500 (0.75mm 2 ) 63900-0300 (1mm 2 ) left (d) 33000-0001 14 63811-2400 n/a right (b) 1.5 n/a n/a right (b) 33012-1001 14 63811-2400 63900-0200 left (d) 1.5 n/a 63900-0200 left (d) male blade crimp terminals (tin plated) 4.00mm sealed rectangular connectors, 84-way 85070 receptacle housing 85071 plug housing 33000 male blade crimp terminal 33012 female receptacle crimp terminal order no. circuits gender material plant no. for samples 85070-0500 84 female nylon 3109, 6201, 1201, 1399, 3102, 5102 order no. circuits gender material plant no. for samples 85071-0100 84 male nylon 3109, 6201, 1201, 1399, 3102, 5102 receptacle housings plug housing americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com asia pacifc north headquarters yamato, kanagawa, japan 81-46-265-2325 apninfo@molex.com asia pacifc south headquarters jurong, singapore 65-6268-6868 apsinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 wellington ct. lisle, il 60532 u.s.a. p: 630-969-4550 f: 630-969-1352 ? 2009, molex usa/kc/2009.01 order no. 987650-2631 www.molex.com/link/src.html
|
